VATUSA Forums
General => The Classroom (Controller Tips) => Topic started by: Rick Rump on November 21, 2019, 10:17:46 AM
-
This event is for both new and veteran TRACON controllers to learn sequencing and spacing in the TRACON environment.
Audience
S2 controllers training for their S3.
All S3 and higher rated controllers.
S2's not training for their S3 at this time and below are encouraged to watch the recording, but may still come but due to space availability may be removed to accommodate others.
About the Instructor
Bradley Tice is currently a Detroit TRACON controller. He has extensive experience in the en-route and terminal environment and has worked for the FAA since 2015.
Course Overview
he big question now is why should you attend this class? In this master class, we will cover speed control, recognizing and deconflicting ties, stacking procedures, and basic sequencing with vectors to final. Whether you are a veteran approach controller or are just starting to work approach controls, this class will give you some good foundational tools to use as you keep controlling.
Check back on 12/8 as I will be posting which tracon we will be using in the master class. It will be helpful for you to review some basic airspace and procedures prior to attending the class. The more you know the better controller you'll become).
Recording Link (https://youtu.be/cDwSzAwsgAI)
-
Any idea what time this might take place on the 17th?
-
Ops forgot to include that! 2000-2130E.
-
Hmm, looking forward to this
-
Only if you provide insight as necessary ;)
-
KDTW will be the featured facility for this training class. If you are unfamiliar with the airspace it is recommended that you review the charts.
-
You mentioned that the Google Hangout link would be posted at this time as well? Anything on that?
-
Its been added.
-
Just a note for everyone, this is going to be our first time using Google Meet so please bare with us. It lacks the flexibility of our previous system, Zoom.
We will have zoom ready in case we encounter issues, but as it only provides for 40 minute meeting lengths we may need to get a little creative.
-
Just a note for everyone, this is going to be our first time using Google Meet so please bare with us. It lacks the flexibility of our previous system, Zoom.
We will have zoom ready in case we encounter issues, but as it only provides for 40 minute meeting lengths we may need to get a little creative.
Have you considered Discord? You can "Go Live" in a server voice channel and share your screen. We used this with a ZOA meeting recently and it worked out alright.
-
Super excited for this!
-
Just a note for everyone, this is going to be our first time using Google Meet so please bare with us. It lacks the flexibility of our previous system, Zoom.
We will have zoom ready in case we encounter issues, but as it only provides for 40 minute meeting lengths we may need to get a little creative.
Ryan,
Thanks, never actually thought of Discord. We may utilize that if google hangout fails to give us what we need in lieu of zoom. I will be streaming it for twitch's auto recording purposes too.
Have you considered Discord? You can "Go Live" in a server voice channel and share your screen. We used this with a ZOA meeting recently and it worked out alright.
-
Hello, may I know the UTC/Zulu time for this class?.
-
Will a recording of this session be available after?
This event is for both new and veteran TRACON controllers to learn sequencing and spacing in the TRACON environment.
Audience
S2 controllers training for their S3.
All S3 and higher rated controllers.
S2's not training for their S3 at this time and below are encouraged to watch the recording, but may still come but due to space availability may be removed to accommodate others.
About the Instructor
Bradley Tice is currently a Detroit TRACON controller. He has extensive experience in the en-route and terminal environment and has worked for the FAA since 2015.
Course Overview
he big question now is why should you attend this class? In this master class, we will cover speed control, recognizing and deconflicting ties, stacking procedures, and basic sequencing with vectors to final. Whether you are a veteran approach controller or are just starting to work approach controls, this class will give you some good foundational tools to use as you keep controlling.
Check back on 12/8 as I will be posting which tracon we will be using in the master class. It will be helpful for you to review some basic airspace and procedures prior to attending the class. The more you know the better controller you'll become).
Please ensure you mute yourself upon entering the hangout. Participation is limited to 45.
Course Meeting Information
Google Hangout (https://meet.google.com/zhr-boff-xma)
Zoom (backup in case google meet fails)
Zoom (https://zoom.us/j/8428086508)
-
0300Z on 12/19.
As per the section quoted, a recording will be made available.
-
0300Z on 12/19.
As per the section quoted, a recording will be made available.
Wouldn't this be 0100z on the 18th? Easten being UTC -5 right now, and tonight being the 17th?
-
I mean....... :p yup!
-
Did anyone else record this by any chance? The recording has a hot mic. (Feel better, person with a cold!)
-
Yeah I thought my mic was muted, I noticed it about 15 min through so it dies down then.
-
This was awesome. I would love to see more of this!
-
Gotcha Rick, thanks! That’s about as far as I’d gotten.