VATUSA Forums

General => The Control Room Floor => Topic started by: Chandler Hoyle on August 28, 2019, 12:29:10 PM

Title: VRC Transmitting And Receiving Issues.
Post by: Chandler Hoyle on August 28, 2019, 12:29:10 PM
in my VRC i can't transmit or receive anything, i set my ptt key and i try to talk on freq and the TX doesn't light up and when i monitor other freq i cant hear the controllers or pilots talking and i've confirmed my audio settings are correct.
Title: Re: VRC Transmitting And Receiving Issues.
Post by: Matthew Kramer on August 28, 2019, 01:10:32 PM
Sounds like you haven't fully configured the voice room and frequency settings. You also have to route the audio through your headset or speakers using the right checkbox.
Title: Re: VRC Transmitting And Receiving Issues.
Post by: Chandler Hoyle on August 28, 2019, 01:18:29 PM
Quote from: Matthew Kramer on August 28, 2019, 01:10:32 PM
Sounds like you haven't fully configured the voice room and frequency settings. You also have to route the audio through your headset or speakers using the right checkbox.
Yea i've configured all of this and checked the right boxes
Title: Re: VRC Transmitting And Receiving Issues.
Post by: Chandler Hoyle on August 28, 2019, 01:38:45 PM
All this stuff happened randomly one night i hopped on and nothing worked. And the weird thing is it doesnt work on VStars or vERAM but all other programs work perfectly
Title: Re: VRC Transmitting And Receiving Issues.
Post by: Enrico Noia on August 28, 2019, 02:12:51 PM
Maybe you have the anti-virus blocking the audio stream. I have kaspersky and it happened to me quite a few times. You have to go in the options and allow the anti-virus to let the software use audio stream
Title: Re: VRC Transmitting And Receiving Issues.
Post by: Chandler Hoyle on August 28, 2019, 04:37:34 PM
Ok its a issue with my network, i switched to my Hotspot on my phone and it worked fine how do i fix that?
Title: Re: VRC Transmitting And Receiving Issues.
Post by: Don Desfosse on August 29, 2019, 01:22:28 PM
Do you have the correct ports forwarded through your router?