1
The Control Room Floor / Sector Files
« on: January 18, 2009, 03:36:27 PM »
looking for sector files for the atc programs.
I'm needing the ZKC. It's not on the ZKC homepage
I'm needing the ZKC. It's not on the ZKC homepage
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
The Flight Deck / Software Setup Issues
« on: January 06, 2009, 11:38:36 PM »
OK all, as I had mentioned if I came across something I would let you know, well here it is,
Once I let it out your giong to say DUH !
ok here it is
wait for it , , , ,
If you are going to fly in the United States, , , , , Get on a United States Server
When I first installed Vatsim the "refresh servers" button was not working, but it worked tonight.
Found out that I was on UK-1
Changed to S3, pinged all of the US servers with the ping command (in a dos prompt) and in Tulsa
got a 59 ms return.
Up and running good now
Ya, I know DUH, but could not locate the server list.
It's probably there somewhere, I just missed it.
I dont know if this is the place to list the servers, but if someone knows where they are please respond with a link
Once I let it out your giong to say DUH !
ok here it is
wait for it , , , ,
If you are going to fly in the United States, , , , , Get on a United States Server
When I first installed Vatsim the "refresh servers" button was not working, but it worked tonight.
Found out that I was on UK-1
Changed to S3, pinged all of the US servers with the ping command (in a dos prompt) and in Tulsa
got a 59 ms return.
Up and running good now
Ya, I know DUH, but could not locate the server list.
It's probably there somewhere, I just missed it.
I dont know if this is the place to list the servers, but if someone knows where they are please respond with a link
3
The Flight Deck / Software Setup Issues
« on: January 04, 2009, 10:25:08 PM »Quote from: Harold Rutila
Hi Mark,
I was Denver Center last night when you were calling me up. There is a feature on my radar client that allows me to select aircraft based on their callsign. After trying different variations of your callsign to get you selected on the scope (so that I could open your flight plan and such), I was unable to do so. With that said, I switched radar modes to where I could see all callsigns, and I looked all around for you in my airspace without prevail.
Are you sure that you connected to VATSIM at Denver International (KDEN) or a nearby field?
ATC Note: No scope filters were used on that session.
I think I found the problem ,,,,,, FSInn was set to observer mode.
I just got done with LAX and they picked me up right off the bat
Thanks again
4
The Flight Deck / Software Setup Issues
« on: January 04, 2009, 10:22:57 PM »Quote from: Brian Fuller
Hi Mark, most of these are answered in the VATSIM FSInn forum.
Pretty sure the installation instructions does say to put your full name in there, and home airport, I am not sure why that is even there, I have never filled it out personally.
If FSFDT is all red, then I am not even sure how ATC is saying they can't see you since I don't know how you are even talking to them.
Local means that is you talking, it doesn't mean you are in any "Local" mode.
The Load Servers button doesn't seem to work, but you can manually enter the IP you want in there, and you can get the IP from ServInfo or from the Vatsim homepage.
Thanks Brian
5
The Flight Deck / Software Setup Issues
« on: January 04, 2009, 04:54:12 PM »
N442MA
Need setup help
I finally cured the communication problem I was having.
I logged in at Denver and was not visible to the Denver radar scope
ATC said I was totally invisible to him.
There are many settings and functions not documented or described in the setup i.e.
1. name and home base (the home base part)
2. FSFDT is always red
3. text base ATC does not transmit (echos local only)
4. The "SELCAL" settings
I also only have one server to operate from, shouldn't there several or many
Please help soon
Thanks all,
Need setup help
I finally cured the communication problem I was having.
I logged in at Denver and was not visible to the Denver radar scope
ATC said I was totally invisible to him.
There are many settings and functions not documented or described in the setup i.e.
1. name and home base (the home base part)
2. FSFDT is always red
3. text base ATC does not transmit (echos local only)
4. The "SELCAL" settings
I also only have one server to operate from, shouldn't there several or many
Please help soon
Thanks all,
Pages: [1]