VATUSA Forums

General => General Discussion => Topic started by: Kenny Bardwell on April 01, 2012, 07:13:18 PM

Title: Kenny B. Signing in
Post by: Kenny Bardwell on April 01, 2012, 07:13:18 PM

Hello everyone,

I have recently came to have an interest in ATC and all related.
I have taken my test and failed. That is a my bad.
I reviewed the questions I got wrong and I know where I failed.
However only 1 question still confuses me. I however might be missing something.
I can't remember what I had answered on the original test.
"The ATC position which normally selects the runway in use is:
But I Re-read and I and pushing on TWR as my next response. Would I still be incorrect?

As far as retaking the test do you guys issue out a different version of the test?
If so bring it on

Using VRC few questions.
Would it be suggested that I wait to be assigned to a ARTCC to be pointed in the correct direction for sector and POF related stuff.

At this moment this is all I can think of.
I am currently engrossed in a lot of reading lol. So any suggestions is welcome.

Thanks
Paranoia

Title: Kenny B. Signing in
Post by: Colin Schoen on April 08, 2012, 09:57:48 AM

Hello,
Welcome to VATUSA. Yes TWR selects the normal runway in use. You will be directed to the VRC sector, alias, and POF files once you join a ARTCC. Let us know if you have any further questions.

Regards,
-Colin

Title: Kenny B. Signing in
Post by: Bob Carmona on April 09, 2012, 07:05:31 PM

[!--quoteo--][div class=\\\'quotetop\\\']QUOTE [/div][div class=\\\'quotemain\\\'][!--quotec--]Would it be suggested that I wait to be assigned to a ARTCC...[/quote]

You will not be assigned an ARTCC, that is your choice.